MINNCARE TEST STRIPSINSTANT, EASY TO READ INDICATORS
Minncare® test strips provide quick results with easy-to-read indicators. There are two types of strips. They are Minncare 1% STRIPS and Minncare RESIDUAL STRIPS. Minncare Test Strips represent the leading edge of test strip technology. Designed by the producers of Minncare Cold Sterilant, these test strips combine ease-of-use with precise results.
Convenient- dip and read
Reaction Zone pad for 6 different readings
Validated and tested
Precise and reliable measurements
YOUR TOOL FOR A BETTER SOPEFFICIENT, RELIABLE AND ACCURATE
Minncare® test strips allow Minncare users of Water systems sanitization processes, an effective way to write and follow a fool-proof SOP. Instead of guess work it allows users to precisely measure both 1% concentration of Minncare throughout your system and once the sanitization cycle is completed, the residual test strips will help them to conclude that Minncare traces are completely removed from your system.
MINNCARE 1% TEST STRIPSEASILY CHECK SOLUTION CONCENTRATION
Minncare 1% Test Strips verify adequate concentration of a 1% Minncare solution during sanitization of your high purity water system. These convenient dip-and-read strips can be used at any test port in your system to provide an accurate pass/fail measurement of Minncare solution. Since accurate spread of 1% Minncare solution is very important for successful sanitization, these strips prove to be invaluable in their usage.
MINNCARE RESIDUAL TEST STRIPSEASY CHECK MINNCARE RESIDUAL LEVELS
Minncare Residual Test Strips are easy to use and are conveniently packaged 100 test strips per container. Each strip has a reaction zone pad located at one end of the strip. When stored and used properly, the test strip pad can indicate residual Minncare levels as low as 1 part per million (ppm). The reaction zones are set to provide six different reading levels at 100, 30, 10, 3, 1 and 0 (zero) ppm (parts per million) of residual Minncare in your water.